(New account activations occur Mon-Sun 8am-11pm PST)
Workstation has NO internet connection (air gapped)
If your creative workstation has no internet, some hardware is required along with an external computer to install Evercast on so you can stream (i.e. laptop). Click here for the recommended computer specs, gear and instructions.
My workstation HAS an internet connection
Breakout box turned off:
If you are using a breakout box and are willing to turn it off during a live Evercast session:
Loopback Audio: Loopback captures audio directly from any application for Evercast to stream. For full setup instructions, click here.
Breakout box kept on:
If you want to keep your breakout box on:
A) Audio Cable: If your workstation has a ‘line-in’ port, you can use an audio cable to pull audio from an audio source (i.e. mixer headphone jack) and into the line-in on the workstation. Usually a ¼ inch to ⅛ inch cable. For full setup instructions, click here.
B) Hardware Option: Click here to walk through the recommended computer specs and gear.
I don’t have a breakout box:
If you are NOT using a breakout box, then you will either need:
A) Loopback Audio: Loopback captures audio directly from any application for Evercast to stream. For full setup instructions, click here.
B) Audio Cable: If your workstation has a ‘line-in’ port, you can use an audio cable to pull audio from an audio source (i.e. mixer headphone jack) and into the line-in on the workstation. Usually a ¼ inch to ⅛ inch cable. For full setup instructions, click here.
My workstation has NO internet connection (air gapped)
If your creative workstation has no internet, some hardware is required along with an external computer to stream (i.e. laptop). This link will walk you through the recommended computer specs and gear: evercast.us/setup/win/config1
My workstation HAS an internet connection, even if it’s only connected during Evercast Sessions
Breakout box turned off:
If you are using a breakout box and are willing to turn it off during a live Evercast session:
Desktop Audio: Evercast can grab audio directly from your PC’s sound card. If you use this feature, you must video conference from a separate computer (i.e. laptop, etc). evercast.us/setup/win/config2
Breakout box kept on:
If you want to keep your breakout box on:
A) Audio Cable: If your workstation has a ‘line-in’ port, you can use an audio cable to pull audio from an audio source (i.e. mixer headphone jack) and into the line-in on the workstation. Usually a ¼ inch to ⅛ inch cable. For full setup instructions, click here.
B) Hardware Option: Click here to walk through the recommended computer specs and gear:
I don’t have a breakout box:
If you are NOT using a breakout box, then you will either need:
A) Desktop Audio: Evercast can grab audio directly from your PC’s sound card. If you use this feature, you must video conference from a separate computer). For full setup instructions, click here.
B) Audio Cable: If your workstation has a ‘line-in’ port, you can use an audio cable to pull audio from an audio source (i.e. mixer headphone jack) and into the line-in on the workstation. Usually a ¼ inch to ⅛ inch cable. For full setup instructions, click here.
